In Easter

bunny place card holders

I decided to make some seating cards for the Easter table. Originally I was going to use just some sculpey and make a circle to hold a card – but then at the last minute I added ears and I think they are super cute. Here’s how I did it. 

Step 1: Roll a circle out of Sculpey + take your seating card (or something of the same thickness) and create a slit in the centre. Next, create some ears out of Sculpey. To attach the ears, with your fingers wedge open the slit you created with the seating card, and gently attach the ears to the front half of the bunny head.

Step 2: Take your seating card and put it back in the slit and mould the head again around the card so the card fits snugly, but you know it will be able to act as a card holder. You do this step because after fiddling around with attaching the ears, your bunny head likely got slightly distorted.

Step 3: Follow the instructsion on the packaging and bake. (Mine took 15 minutes)

Step 4: Mix some light pink paint and paint the inside of the bunny ears.

And ta-da! A simple seating card holder for Easter. I purposefully decided not to put a face on the bunny to save it from going too cutesy

Materials Used: Clay; Sculpey. Seating Card; Cloud Mini Card via The Penny Paper Co. 

Ps., Sorry for hitting you with so many posts in a short amount of time. Typically I space out posts but because this project is related to a holiday that is right around the corner, and this project was 100% last minute, I figured I should publish it now. 

You Might Also Like

No Comments

Leave a Reply